Hexy Servitor32 not moving any servos

Hello! I just built my Hexy bot, through the process the built document says to verify each servo is working by hooking it up to the servitor board. None of the servos moved in the process. I assumed my batteries were weak (Alkaline). I continued the build, plugging each servo as per the documentation into the servitor32 board.

I still get zero movement and no noise from the servos. I am using the 4xAA board with NIMH batteries. The Servitor32 board powers ups, I can upload the example firmware to it via the Arduino IDE. I have the 4xAA board attached to the servo barrel plug port. I’m not sure what else to do at this point.