PoMoCo

Hexy Questions, Problems and Suggestions
#1

Hi,

Any ideas on an issue I’m having when connecting to the PoMoCo, I been using my laptop to connect via the USB
cable and all was working fine.

Then I setup the bluetooth to connect and it works great, BUT if I now go back and use the USB cable
connection, it won’t connect to the COM’s port. It only seems to work on Bluetooth.

I still can connect via the USB cable using my PC, but not now on the laptop, since I setup the bluetooth.
I’ve tried various things with port settings etc, but I can’t get it to connect via the USB cable now!

I’m using Windows 7 on the laptop and PC.

Chris.

#2

One thing to make sure is that there is only one plugged into the servotor32 board at one time. This means if you are using USB, don’t have the bluetooth module plugged in. If you’re trying to use bluetooth, don’t have the USB plugged in.

#3

Yes, I do not have both plugged in at the same time.

#4

I have it working again through the USB cable on the laptop. It kept selecting COMs port 7 and for some reason
would lock up, when selecting the Serial monitor under Arduino, and just wouldn’t connect on the PoMoCo.
After trying COMs port 2 and other free COMs ports, it still did the same.
But after switching it off a couple of times it selected COM 6 ( Before COM 6 was in use and couldn’t select it manually) and works OK via PoMoCo and the Serial monitor under Arduino.

Weird!

Chris.